Alpine CDA-9811R Car Stereo System User Manual


 
13-EN
CD/MP3/WMA
To customers who use CDA-9815RB/CDA-9813R/CDA-
9812RX:
MP3/WMA can be played back on the built-in CD
Player of this unit.
To customers who use CDA-9811R:
MP3 can be played back if an MP3 compatible CD
changer is connected. However, WMA cannot be played
back.
Playback
1
Press c.
The movable display will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The movable display will close and playback will begin.
When a disc is already inserted, press SOURCE/POWER
to switch to the CD mode.
The mode will change every time the button is pressed.
TUNER CD CD CHANGER* TUNER
* Only when the CD changer is connected
c
-/J
g f
Rotary
encoder
SEARCH
6( )
8
9
4(
)
5(
)
SOURCE/
POWER
3
Press g or f to select the desired track (file).
Returning to the beginning of the current track (file):
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track (file) :
Press f.
Fast forward :
Press and hold f.
4
To pause playback, press -/J.
Pressing -/J again will resume playback.
5
To eject the disc, press c.
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
If the CD does not eject, press and hold c for at least 3 seconds
with the movable display open.
The CD-player can play discs containing audio data, MP3 data
and WMA data.
The MP3 indicator is lit during MP3 playback.
The WMA indicator is lit during WMA playback.
The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
While playing back MP3/WMA, press 8 or 9 to move the folder
up or down.