Alpine CDA-9811R Car Stereo System User Manual


 
36-EN
Remote Control
Controls on Remote Control (CDA-9815RB/
CDA-9813R/CDA-9812RX only)
1 Power Button
Press this button to turn the power on/off.
2 Source Button
Press this button to select the audio source.
3 -/J Button
Press this button to switch between the Play and Pause
modes for CD.
4 TILT 98 Buttons
Press this button to adjust the angle of the movable
display.
5 Band/Programme Button
Radio mode: BAND Button
Press this button and the band will change.
CD/Changer mode: To switch the disc mode.
6 Volume Adjustment Buttons
To increase the volume level:
Press the L button
To decrease the volume level:
Press the K button
7 8 Button
Radio mode: Pressing this button will select, in ascending
order, stations programmed into the radio's presets as
shown below.
1 2 ... 6 1
CD Changer mode: DISC Select (UP) button
Press this button to select a disc in ascending order.
MP3/WMA mode: Press the Folder Select (UP) button to
select the folder.
8 g DN Button
Radio mode: SEEK (DN) Button
CD mode: Press this button to go back to the beginning of
the current track.
9 f UP Button
Radio mode: SEEK (UP) button
CD mode: Press this button to advance to the beginning
of the next track.
! 9 Button
Radio mode: Pressing this button will select, in
descending order, stations programmed into the radio's
presets as shown below.
6 5 ... 1 6
CD Changer mode: DISC Select (DN) button
Press this button to select a disc in descending order.
MP3/WMA mode: Press the Folder Select (DN) button to
select the folder.
" Mute Button
Press this button to lower the volume by 20 dB instantly.
Press this button again to cancel.
# Audio Processor Button*
1
CDA-9815RB/CDA-9813R only
Each press the button to switch the audio processor
mode.
For details, refer to “Operating the Audio Processor” as
shown below.
CDA-9815RB/CDA-9813R/CDA-9812RX
Press the button to call the external audio processor
mode when the external audio processor is connected.*
2
*
1
This button is used for CDA-9812RX in conjunction with an
optional Ai-NET processor.
*
2
For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased.
Operating the Audio Processor
(CDA-9815RB/CDA-9813R only)
1
Press A.PROC to select the mode.
Normal mode EQ mode (Equalizer Presets)Private mode
(Recalling the Stored Equalizer Curve) Time Correction
mode (Recalling the Stored Time Correction) Crossover
mode (Recalling the Stored Crossover) Normal mode
2
Press 8 or 9 to select the mode.
EQ mode
Select from FLAT, POPS, ROCK and NEWS.
Private mode/Time Correction mode/Crossover mode
Select from MEMORY 1 through 6.
1
2
3
4
#
!
9
"
6
5
7
8