Filter
Top Products
12-EN
Priority PTY (Programme Type)
This function allows presetting of a programme type such as music
category, news, etc. You can listen to a programme in the preset
programme type as the unit automatically gives priority to the preset
programme type when it begins broadcasting, and interrupts the
programme you are currently listening. This feature is functional
when your unit is set to a mode other than the LW and MW.
1
Press F/SETUP so that the “FUNC” indicator (only
the underlined portion of the “FUNC” indicator for
CDA-9811R) lights up.
2
Press 2/P.PTY to activate the PRIORITY PTY
mode.
“PRIO-PTY” is displayed for 2 seconds and then the
programme type for 3 seconds. The initial setting is
“NEWS.”
• If no operation is performed within 5 seconds after pressing
2/P.PTY, the PRIORITY PTY mode is automatically cancelled.
3
Press g or f within 5 seconds while “NEWS”
is being displayed to choose a desired programme
type. Then press 2/P.PTY.
The PRIORITY PTY function will activate.
4
Press 2/P.PTY to activate the PRIORITY PTY mode
again.
To change the programme category, perform the step 3.
To disable the PRIORITY PTY function, press and hold
2/P. PTY for at least 2 seconds.
• In the PRIORITY PTY function, unlike in the T.INFO function, the
volume does not increase during operation.
5
Press F/SETUP to activate the normal mode. The
“FUNC” indicator (only the underlined portion of
the “FUNC” indicator for CDA-9811R) goes out.
• Operate the unit while the“FUNC” indicator (only the underlined
portion of the “FUNC” indicator for CDA-9811R) lights up.
If no buttons are pressed within 5 seconds, the “FUNC” indicator
(only the underlined portion of the “FUNC” indicator for CDA-
9811R) goes out.
Displaying Radio Text
Text messages from a radio station can be displayed.
1
Press TITLE while receiving FM in the radio mode
to select the Radio Text display.
The display will change every time the button is pressed.
CDA-9815RB
CDA-9813R/CDA-9812RX/CDA-9811R
PS (Programme Service Name) → Radio Text → STATION
TITLE → FREQUENCY → PS (Programme Service Name)
The display shows “WAITING” for a few seconds, then starts
scrolling the text message.
• If there is no receivable text message or the unit cannot receive a
text message properly, the display shows “NO TEXT.”
→
Radio Text
FREQUENCY
PS (Programme
Service Name)
FREQUENCY
PS (Programme
Service Name)
FREQUENCY
TITLE
FREQUENCY
→
→