Filter
Top Products
26-EN
i-Personalize™
Operation (CDA-9815RB/CDA-
9813R only)
About i-Personalize™
You can download data (from Alpine’s website) to a CD-R, and
download and store the data to the CDA-9815RB/CDA-9813R.
To start i-Personalize, access the URL below and follow the on-screen
instructions.
http://www.alpine.com or http://www.alpine-europe.com
or http://www.alpine.com.au
Downloadable data
The file name of download data shall be
“A_U*****.MP3.”
A_U∗∗∗∗∗.MP3
Extender (fixed)
Identifier (alphabet or number 5
letters maximum)
Header (fixed)
You can create a file name via the website. Do not change a
file name once it has been created. Malfunction may result.
• For details about procedures of download, see ALPINE’s Web site.
• If a external audio processor is connected, data that is downloaded
cannot be used.
Data Downloading
1
Insert the CD-R disc containing the data.
If the source is not the CD mode, press SOURCE/
POWER to change to CD mode.
2
Press and hold -/J for at least 2 seconds.
The mode switches to the download mode to show the
download confirmation screen.
3
Turn the Rotary encoder to select “OK”, then
press the Rotary encoder.
Data search of the disc starts and the first file name is
displayed.
• Selecting “NG” will halt the download mode.
• If a file is not found by the data search, “NO FILE” is indicated.
• The “NO FILE” display will automatically disappear if no
operation is performed for 5 seconds.
4
Turn the Rotary encoder to select “DOWNLOAD”,
and then press the Rotary encoder to start.
Data downloading starts.
The file currently shown in the display is downloaded.
If you want to download other files, select NEXT FILE to
call up file names.
CANCEL : Halts the download
DOWNLOAD : Starts the download
NEXT FILE : Searches the next file
5
When data download is finished successfully, the
confirmation screen is displayed for 5 seconds and
the download mode closes.
Successfully downloaded items are indicated as checked
boxes on the confirmation screen.
PARAMETRIC EQ data
The data is memorized in Preset 6 of Parametric EQ mode.
The memorized data settings in Preset 6 (Parametric EQ
mode) are automatically applied.
X-OVER (Crossover) data
The data is memorized in Preset 6 of X-OVER mode. The
memorized data settings in Preset 6 (X-OVER mode) are
automatically applied.
You cannot download the data if the setting of the 2WAY/3WAY
switch is not suitable for the data.
TIME CORRECTION data
The data is memorized in Preset 6 of the Time correction
mode. The memorized data settings in Preset 6 (Time
Correction mode) are automatically applied.
• When you download the data again, the data is overwritten in
Preset 6.
Data is memorized in Preset 6 of the
Parametric EQ Mode.
Data is memorized in Preset 6 of the
Time Correction Mode.
Data is memorized in Preset 6 of the
crossover mode.
Parametric
equalizer
Time correction
Crossover
-/J Rotary encoder
SOURCE/
POWER