Alpine CDA-9815RB Car Stereo System User Manual


 
11-EN
PTY (Programme Type) Tuning
1
Press F/SETUP so that the FUNC indicator lights
up. (Only the underlined portion of the FUNC
indicator for CDA-9811R.)
2
Press 3/PTY to activate the PTY mode, while the
unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently received
will be displayed for 5 seconds.
If there is no receivable PTY broadcast, NO PTY will be
displayed for 5 seconds.
If no RDS station can be received, the display shows NO
PTY.
If no operation is performed within 5 seconds after pressing PTY,
the PTY mode will be automatically cancelled.
3
Press g and f within 5 seconds after
activating the PTY mode to choose the desired
programme type while the PTY (programme type)
is being displayed.
Each press scrolls the programme type by one.
4
Press 3/PTY within 5 seconds after selecting the
programme type to start searching for a station in
the selected programme type.
The chosen programme type display blinks during
searching and lights when a station is found.
If no PTY station is found, NO PTY will be displayed for 5
seconds.
5
Press F/SETUP to activate the normal mode.
The FUNC indicator (only the underlined portion
of the FUNC indicator for CDA-9811R) goes out.
Operate the unit while the FUNC indicator (only the underlined
portion of the FUNC indicator for CDA-9811R) lights up. If no
operation is performed within 5 seconds, the FUNC indicator
(only the underlined portion of the FUNC indicator for CDA-
9811R) goes out.
Receiving Traffic Information While Playing
CD or Radio
1
Press T.INFO so that the underlined portion of the
T.INFO indicator lights up. (Only the upper lined
portion of the T.INFO indicator for CDA-9813R/
CDA-9812RX.)
2
Press g and f to select a traffic information
station if necessary.
When a traffic information broadcast starts, the unit
automatically mutes the CD player/changer or the regular
FM broadcast.
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
When traffic information stations cannot be received:
In the tuner mode:
When the TP signal can no longer be received for over 1
minute, the underlined portion of the T.INFO indicator
(only the upper lined portion of the T.INFO indicator for
CDA-9813R/CDA-9812RX) blinks.
In the CD mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
The receiver is equipped with the EON (Enhanced Other
Networks) function in order to keep track of additional alternate
frequencies to the AF list. The underlined portion of the EON
indicator (only the upper lined portion of the EON indicator for
CDA-9813R/CDA-9812RX) lights up while an RDS EON station is
being received. If the station being received does not broadcast the
traffic information, the receiver automatically tunes in the related
station that broadcasts the traffic information when it occurs.
3
Press T.INFO to deactivate the Traffic Information
mode.
The underlined portion of the T.INFO indicator (only the
upper lined portion of the T.INFO indicator for CDA-
9813R/CDA-9812RX) goes out.
LIGHT M CLASSICS OTHER M