Alpine CDA-9831 Car Stereo System User Manual


 
8-EN
Radio
Changing the Radio Frequencies for each
Country
For customers not living in North America, change the radio
frequencies as follows.
1
Press MENU to select the SETUP mode.
2
Select the "AREA" mode by pressing g or f.
3
Choose either AREA 1 or AREA 2 by turning the
Rotary encoder.
AREA 1: Radio frequencies for North America
AREA 2: Other Radio frequencies
4
Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
The stored radio stations will be cleared every time you change the
setting.
Listening to Radio
1
Press SOURCE/POWER until a radio frequency
appears in the display.
2
Press BAND/TEL. repeatedly until the desired
radio band is displayed.
FM1 FM2 AM FM1
3
Press TUNE/A.ME to select the tuning mode.
SEEK DX (Distance mode) SEEK LO (Local mode)
MANUAL (Manual mode)SEEK DX
The initial mode is DX SEEK (Distance mode).
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
SOURCE/
POWER
BAND/
TEL.
g f
TUNE/
A.ME
Preset buttons
(1 through 6)
4
Press g or f to tune in the desired station.
Holding down g or f will change the frequency
continuously.
The ST indicator appears on the display when a stereo FM station
is tuned in.
Manual Storing of Station Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of
the preset buttons (1 through 6) that you want
to store the station on .
The selected station is stored.
The display shows the band, preset no. and station
frequency memorized.
•A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
Automatic Memory of Station Presets
1
Press BAND/TEL. repeatedly until the desired
radio band is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while
the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location no. 1.
If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
Press BAND/TEL. repeatedly until the desired
band is displayed.
2
Press any one of the station preset buttons (1
through 6) that has your desired radio station in
memory.
The display shows the band, preset number and
frequency of the station selected.
Rotary
encoder
SEARCH
MENU