Filter
Top Products
14-EN
Switching the Tuner Mode
The CDA-7995/CDA-7894/CDA-7893/CDA-7892
incorporates the MAX TUNE SQ for the highest quality
tuner audio. Moreover, you can choose between two
settings to suit your own personal sound preferences
and usage.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select
"NORMAL or HI-FI."
3 Press the BAND button to switch the TUNER mode.
HI-FI
←→
NORMAL
NORMAL: Standard setting
HI-FI: Sound quality priority setting
NOTES
• The initial setting at the factory is "NORMAL."
• If you find the sound is very noisy while listening to the tuner
in the HI-FI mode, we recommend you change to the
NORMAL mode.
4 When the setting is completed, press the SETUP
button to return to the normal mode.
NOTE
"MP3 File Selection" and "Playing MP3 data" in the "SETUP"
mode section are described in MP3 Operation on page 26.
Changing Lighting Color
(CDA-7894 only)
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select
“AMBER”.
3
Press the BAND button to toggle the mode between
AMBER ON (amber) and AMBER OFF (green).
4 Press the SETUP button to set the selected mode.
Dimmer Control
(CDA-7995/CDA-7894/CDA-7893 only)
Set the DIMMER control to AUTO to decrease the
illumination brightness of the unit with the head lights of
the vehicle ON. This mode is useful if you feel the unit's
backlighting is too bright at night.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select
“DIM”(DIMMER).
3 Press the BAND button to select the Dimmer mode.
Each press toggles between DIM AUTO and DIM
MANUAL.
4 Press the SETUP button to activate the normal mode.
Subwoofer On and Off
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select “SUB
(Subwoofer).”
3 Press the BAND button to toggle mode between
SUB W ON and SUB-W OFF (CDA-7892: SUB W
OFF).
NOTE
The initial setting at the factory is subwoofer ON.
4 Press the SETUP button after setting the SUB-W ON.
5 Press the MODE button repeatedly to select the
SUB-W mode.
Press the g DN or f UP button after selecting the
SUB-W mode, and the subwoofer output phase is
toggled SUBW NOR (0°) or SUBW REV (180°).
6 Tur n Rotary encoder until the desired sound is
obtained in each mode.
SETUP Operation
f UP g DN
BAND
SETUP
→ SUB-W → BALANCE
VOLUME ← DEFEAT ← FADER ←
SOURCE MODE/Rotary encoder