Alpine CDE-100E Car Stereo System User Manual


 
Controlling USB memory (Optional)
A USB memory device may be connected to this unit. With USB
memory connected, playback of files on the device is controlled from
this unit.
The controls on this unit for USB memory operation are operative
only when a USB memory is connected.
Playing MP3/WMA/AAC Files with the
USB memory (Optional)
If you connect a USB memory containing MP3/WMA/AAC, you can
play these files on this unit.
1
Press SOURCE/ to switch to the USB AUDIO
mode.
The mode will change every time the button is pressed.
RADIO CD*
1
USB*
2
AUX RADIO
*
1
Displayed only when a disc has been inserted.
*
2
Displayed only when USB memory is connected (CDE-100EUB
only).
2
To pause playback, press BAND/ /.
Pressing BAND/ / again will resume the playback.
The root folder is displayed as “ROOT” in the Folder Name Search
mode.
This unit plays back files on a USB memory device with the same
controls and modes as playback of CDs containing MP3/WMA/AAC.
For details, refer to “CD/MP3/WMA/AAC”.
Before disconnecting USB memory, be sure to change to another
source or set to pause.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
USB Memory Connection (Optional)
Connect USB memory
1
Open the cover of the USB connection terminal.
2
Connect the USB memory directly to the USB
connection terminal, or via the USB cable.
Remove USB memory
1
Carefully, pull out the USB memory from the USB
cable or the USB connection terminal.
2
Close the cover of the USB connection terminal.
Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
When removing USB memory, pull it out straight.
If sound is not output or USB memory is not recognised even when
USB memory is connected, remove USB memory once, then connect
it again.
Route the USB cable away from other cables, etc.
After removing the USB memory, close the cover of the USB
connection terminal to prevent dust or foreign objects from entering
and causing a malfunction.
About MP3/WMA/AAC File of USB
Memory
Playing back MP3/WMA/AAC
MP3/WMA/AAC files are prepared, then stored to a USB
memory. This unit can recognise at least 999 folders (including
root folder) and 255 files per folder stored in USB memory.
Playback may not be performed if a USB memory exceeds the
limitations described above.
Do not make a file's playback time more than 1,000 minutes.
Media supported
This device can play back USB memory media.
Corresponding File Systems
This device supports FAT 12/16/32 for USB memory device.
USB memory (Optional)
CDE-100EUB Only
SOURCE/
BAND/ /
USB memory
(Sold Separately)
Cable (Sold
Separately)
This unit
USB Connection Terminal
USB memory
(Sold Separately)
or