Filter
Top Products
18-EN
01GB04CDE101E.fm
ALPINE CDE-101E 68-09359Z76-B (EN)
* This illustrator is CDE-103EBT.P
Setup Before Using
Bluetooth is a wireless technology allowing communication between a
mobile device or personal computer over short distances. This enables a
hands-free call or data transmission between Bluetooth compatible
devices.
• Depending on the Bluetooth version, a Bluetooth compatible device
may not be able to communicate with this unit.
• Proper function of this unit with all Bluetooth compatible devices is
not guaranteed. For handling of the BT compatible device, consult
your ALPINE dealer or ALPINE website.
• Depending on the surroundings, Bluetooth wireless connection may
be unstable.
• When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
• Depending on the connected Bluetooth compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the
connected device(s).
Before using the hands-free phone/audio function, the following
settings need to be made.
1
Be sure to set “INT MUTE” to OFF. Refer to the
SETUP function on page 15.
• To enable sound pass-through of the Bluetooth compatible device,
make sure that INT MUTE is turned OFF (Initial setting on the unit
is OFF).
2
Set “BT IN” to BT ADAPTER (page 16).
• Before using a hands-free phone, it must be paired with this unit.
Refer to “Bluetooth SETUP” (pages 18-19).
For details on the control from a Bluetooth compatible device, refer to
the Owner’s Manual of the Bluetooth compatible device.
1
Set a Bluetooth connection from a Bluetooth
compatible device.
2
The PIN code (“0000”) is displayed on the connected
unit.
• The PIN code is fixed as “0000.”
3
Input the PIN code (“0000”) in a Bluetooth
compatible device.
4
If this unit is successfully connected to a Bluetooth
compatible device, “CONNECTED” is displayed, and
then the unit returns to normal mode.
• The registration number 5 is the guest mode. Content that is
registered as the guest mode is deleted when you set ignition from
ACC to OFF. If all the 5 positions (including guest mode) have been
registered, you cannot register the 6th device. To register another
device, you need to delete one of the device from position1 to 5 first.
• If a Bluetooth compatible device is successfully connected, the next
time when the ignition key of the car is turned to on, the unit will
automatically connect to the previously connected device. However,
the connection may fail. If the auto connection fails, try the
connection manually.
• Set “Setting the Search Mode” (page 19) to VISI M ON to enable this
unit to recognise a mobile phone. For mobile phone passkey
(passcode) input operation, refer to the mobile’s Owner’s Manual.
Bluetooth SETUP
The following steps 1 to 4 are common to the various Bluetooth
functions. For details, refer to each individual function.
• While calling, Bluetooth Setup operation cannot be performed.
• Set “BT IN” to BT ADAPTER, and then perform Bluetooth SETUP
operation.
1
Press and hold SOUND/SETUP for at least 2
seconds to activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
items and then press / /ENT.
BT IN PAIRED DEV* VISIBLE M* AUTO ANS*
CLEAR DEV* SEV NAME* MIC INPUT*
SPEAKER SL* FW VERSION* FW UPDATE*
* When “BT IN” is set to BT ADAPTER, the above items are
displayed.
3
Turn the Rotary encoder to change the settings.
4
Press and hold SOUND/SETUP for at least
2 seconds.
The SETUP mode is cancelled.
BLUETOOTH
(CDE-103EBT only)
About Bluetooth
Before Using Hands-Free Function
Rotary encoder
/VOICE DIAL
SOUND/SETUP
2
/MUTE/
1
//ENT
How to connect to a Bluetooth compatible
device (Pairing)
Bluetooth Setup Operation
01GB00CDE101E.book Page 18 Monday, November 3, 2008 10:12 AM