Alpine CDE-9880R Car Stereo System User Manual


 
29-EN
<JAPANESE CAR>
USB memory Connection (sold separately)
Connect USB memory
Connect USB memory to USB cable.
Remove USB memory
Pull out USB memory squarely from the USB cable.
When removing USB memory, pull it out straight.
If sound is not output or USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.
Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
Route the USB cable away from another cables, etc.
Front Frame
Screws (M5 × 8)
(Included)
This unit
Mounting Bracket
Cable (sold separately)
USB memory
(sold separately)
This unit
USB connector
This unit
USB connector
Cable (sold separately)
USB memory
(sold separately)