Filter
Top Products
16-EN
Setting the Language Font
Two types of font can be selected.
Adjusting Display Contrast
You can adjust the display contrast for better visibility.
• The initial setting at the factory is “0.”
Demonstration
This unit has a demonstration feature for the display.
• To quit Demo mode, set to DEMO OFF.
Playing MP3/WMA/AAC Data (Play Mode)
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
• No sound is produced by the system when the power output is set to
OFF.
LANGUAGE 1 (Initial setting) / LANGUAGE 2
LANGUAGE 1: Normal font
LANGUAGE 2 : European font
CONTRAST
You can adjust in a range of -5 and +3
DEMO ON / DEMO OFF (Initial setting)
MP3/WMA/AAC
CD-DA (Initial setting) / CD-DA&MP3
CD-DA: Only the CD data in Session 1 can be played back.
CD-DA&MP3: CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
External Device
POWER IC ON (Initial setting) / POWER IC OFF
POWER IC OFF: Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit’s internal amplifier is
turned OFF and cannot drive speakers.
POWER IC ON : The speakers are driven by the built-in
amplifier.
Amplifier
Front
left
Front
right
Amplifier
Rear
left
Rear
right
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left