Alpine CDE-W233R Car Stereo System User Manual


 
22-EN
AUX mode:
AUX SET
*7
VOL LV ADJ
*2
DIMMER
*3
BT AUDIO mode (CDE-W235BT only):
BT SET
*8
VOL LV ADJ
*2
DIMMER
*3
Phone mode (Non-calling mode) (CDE-W235BT only):
PHONE SET
*9
VOL LV ADJ
*10
DIMMER
*3
Phone mode (Calling mode) (CDE-W235BT only):
SPK SWITCH
*11
VOICE MUTE
*12
CALL WAIT
*13
CALL
SOUND
*14
END CALL
*15
VOL LV ADJ
*10
DIMMER
*3
*1 The setting items are the same as TUNER setting in SETUP
mode. For details, refer to “SETUP” on page 22.
*2 You can individually emphasize or weaken the volume level
of the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are
linkage. Refer to “Setting the Source Volume Level” on
page 19.
*3 Refer to “Dimmer Control” on page 24.
*4 PLAY MODE can be selected in this mode. For details, refer
to “Playing MP3/WMA/AAC Data (PLAY MODE)” on
page 24.
*5 Refer to “Setting the iPod Control” on page 33.
*6 The setting items are the same as iPod setting in SETUP
mode. For details, refer to “iPod/iPhone Setting” on page 24.
*7 AUX NAME can be selected in this mode. For details, refer to
“Setting the AUX NAME Mode” on page 23.
*8 FW VERSION can be selected in this mode. You can see the
current firmware version about BLUETOOTH by using this
setting.
*9 CALL SOUND, SENDER ID, PB UPDATE, BT MENU, PB
ORDER, AUTO ANS, SEV NAME, SPEAKER SL and FW
VERSION can be selected in this mode. For details about
these settings, refer to “BLUETOOTH SETUP” on page 26.
*10 The Hands free phone talk level, ring tone level and
microphone gain level can be adjusted by using this setting.
The setting values in Option mode and in SETUP mode are
linkage. Refer to “Setting the Source Volume Level” on
page 19.
*11 While calling, the call sound can be switched between the
unit and mobile phone by using this setting.
This operation can also be done by pressing BAND. Refer to
“Call Switching Operation” on page 31.
*12 While calling, and the Voice Mute is activated, the
microphone input will mute instantly and “VOICE MUTE”
will blink. This operation can also be done by pressing .
Refer to “Muting the microphone input quickly (Voice Mute)”
on page 31.
*13 If there is a waiting call, select this item to display the caller’s
Name and waiting number (1 or 2). Press VIEW and the
display will switch.
*14 Refer to “Setting the BLUETOOTH sound quality” on
page 27.
*15 Select this item to hang up the call.
* The illustration is for CDE-W235BT.
* The illustration is for CDE-W233R.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1
Press and hold AUDIO/SETUP (CDE-W235BT only) for at
least 2 seconds or press SETUP (CDE-W233R only) to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL)
AUDIO
*1
GENERAL DISPLAY TUNER IPOD
BLUETOOTH
*2
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
SOURCE/
/ENTER
Rotary encoder
AUDIO/SETUP
SOURCE/
/ENTER
Rotary encoder
SETUP