Filter
Top Products
10-EN
Connections with other equipments
• System Connection <Example 1>
NOTES
• Do not install the power supply unit where it will be exposed to moisture such as under the floor mat or near the air
conditioner. This may cause a malfunction.
• Do not bundle the power supply unit cable with the audio cables. Noise may be induced into your system.
• The power supply unit temperature can become hot. This is not a malfunction.
* For the Ferrite Core, refer to the Owner’s Manual of the product that the IONBUS cable is attached to.
<DVI-9990>
Antenna Receptacle
To antenna plug of the vehicle
To power antenna
To the instrument cluster illumination lead
Connect to a metal part of chassis body with a screw.
Ignition Key
Fuse (7.5A)
Battery
Blue
Orange
Black
Red
Yellow
IONBUS
compatible
monitor
(TMI-M990)
(sold separately)
IONBUS
compatible
monitor box
System switch
“1 (SYSTEM)”
selected
DVD Audio Link cable
(Included with the PXI-H990 or DAI-C990)
IONBUS cable
(Included with
the TMI-M990)
Multimedia Manager
PXI-H990
or
DAC unit
DAI-C990
(sold separately)
IONBUS cable
(Included with the KCI-500B)
IONBUS cable
S video cable (Included)
Ai-NET/IONBUS
converter
(KCI-500B)
(sold separately)
CD changer
(Ai-NET)
or
XM Radio
Receiver
(sold
separately)
When connecting the changer or
XM Radio Receiver, you must
use an Ai-NET/IONBUS converter
(KCI-500B).
Connectable system products
IONBUS compatible monitor
Multimedia Manager or DAC unit
Ai-NET/IONBUS converter
Ai-NET compatible changer
XM Radio Receiver
TMI-M990
PXI-H990 or DAI-C990
KCI-500B
CHA-S634 or CHA-1214
TUA-T021XM or TUA-T020XM
Power supply unit
Ai-NET cable
(Included with CD changer or XM Radio Receiver)
POWER
ILLUMINATION
GND
IGNITION
BATTERY
To
IONBUS terminal
To DVD Audio Link
terminal
To
IONBUS
terminal
To IONBUS
terminal
To
IONBUS
terminal
To Ai-NET
connector
System switch (PXI-H990 only)
• Set to SINGLE when
connecting one PXI-H990.
• When connecting two PXI-
H990s, set the first to FRONT,
and the second
to REAR.
*
*
*
*
*
*