Filter
Top Products
21-EN
Setting an Amplifier Link (CDA-9831 only)
With an external Amplifier Link compatible amplifier MRD-M501 or
MRD-M301 is connected, the amplifier settings are adjustable from
the head unit. A maximum of 8 external amplifiers can be adjusted.
1
Press and hold MENU for at least 2 seconds.
2
Press MENU to select A-Link.
3
Press g or f to select AMP1 to 8, or BASS
VOLUME.
To set the BASS VOLUME
4
Turn the Rotary encoder to adjust the level, then
press the Rotary encoder.
5
When the adjustment has been completed, press
MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
To set the Amplifier
4
Press BAND/TEL. to select from the following
setting items to be adjusted.
INPUT → LOW PASS → SUBSONIC → P-EQ → BASS COMP
→ T.CORR → PHASE → TURN ON DELAY→ OUTPUT
DISABLE (SAFE) → INPUT
5
Turn the Rotary encoder to change the settings.
6
Press the Rotary encoder.
Repeat steps 5 and 6 (above) if there are other items to
set in step 4.
7
Repeat the steps 4 to 6 (above) if other settings will
be adjusted.
To set another amplifier, return to the step 3.
To store the adjusted contents
1) While adjusting the mode, press and hold either button
(1 or 2) for at least 2 seconds.
The adjusted contents are stored.
To recall adjusted and stored contents
1) While adjusting the mode, press either button (1 or 2).
The adjusted and stored contents are recalled.
8
When adjustment has been completed, press
MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
To easily recall adjusted and stored contents
1) Press MENU to select A-Link.
2) Press g or f to select AMP 1 to 8.
3) Turn the Rotary encoder to select Preset 1 or Preset 2.
4) Press MENU to select RETURN. The unit returns to
normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
•For details of each of the settings, refer to the Owner's Manual of
the external amplifier.
• If amplifier settings are made on the CDA-9831 model, do not then
change the setting with the amplifier buttons as the amplifier
display may not match the operations of the CDA-9831 model.
•"NO Link" is displayed if the amplifier is removed or its power
cannot be turned on, etc.
Displaying the External Amplifier Information
(CDA-9831 only)
When an external Amplifier Link compatible amplifier is connected,
the external amplifier's information (voltage, electric current,
temperature) can be shown in the display of the head unit.
1
Press TITLE in the Radio or CD mode to switch
the display of the external amplifier information.
•For switching the display, refer to the section "Displaying the Title/
Text" (page 19).
•For changing the XM display, refer to the section "Changing the
Display (page 27).
•To switch the display between Celsius and Fahrenheit, refer to
page 25.
Temperature
Display
Electric current
Display
75.0
AMP
°F
12.4V 25.6A
Voltage Display
This indicator is lit when the Amplifier Link is set.
This indicator is lit when external amplifier
information is displayed.