Filter
Top Products
10
AV RCA Connector (Video, Audio R, Audio L)
These RCA-type connectors connect to any video
source. This connector is used as an A/V input for
the TMX-R680A, however it may also be used as an
output for other units.
IGN/ACC (Red)
This wire connects to the ignition or accessory line
of the vehicle. This triggers main power to turn the
unit on. Although both DIN cables have this wire,
only one of them should be connected to the IGN/
ACC line. In the delayed dome light mode, it is used
for turning the dome light OFF when the ignition is
ON.
GND (Black)
This is the shield GND. It should connect to the
vehicle’s chassis for reducing any noise.
IR Remote Out (White/Brown)
The Remote Out wire connects to any ALPINE
Mobile Video product which has an external remote
input function. For example, products such as a
DVD, VCR and TV Tuner.
External AV Select (Pink/Blue)
External AV Select forces the TMX-R680A to
switch to the A/V input sending the AV Select trigger.
This trigger is a pulsed signal (Active Low, 500ms or
more). If this input is remains low, switching to other
sources is not possible (Switching sources using the
Remote Control is still possible). This is useful if
you don’t want an AV source to be interrupted.
Playing a video is a good example of this scenario.
This function is mainly used for connecting with
other ALPINE products.
WIRING/CONNECTIONS
Mini-DIN to RCA Interface