Filter
Top Products
3
Installation
Prior to installation, locate the area where the XM Universal Tuner
Box is installed. Make sure you have followed the location
requirements for the XM Universal Tuner prior to installing the
Alpine Smart Digital Adapter.
Step 1
Remove the Alpine car stereo head unit from your dash board.
Important: Depending on how your Alpine head unit was installed
you may have to remove part or all of your dash board to remove
the head unit before the Alpine head unit can be pulled out. You
may also have to remove screws to complete this step.
Step 2
Connect the red and white audio cables into the red and white
connectors on the XM tuner box (XMD1000) as well as the black
cable with straight connector. Plug the other end of these
three cables into the top of the Alpine smart digital adapter
as shown in Fig 2.
Note: Make sure all cables are connected securely.
Step 3
Connect the remaining cable with the white rectangle connector
into the bottom of the XMDALP100 as shown in Fig 2.
Smart Digital Adapter
Fig 2