Filter
Top Products
6
Woofer #2 replacement continued:
7
This is what it looks like with the grill and
woofer removed. Place the new woofer
(part #0010141) where the old one
was. Follow the same steps as above,
but backwards 6 to 1. Power up the
SWA2801z and the new woofer should
now be pumping out glorious lows.
Awesome, you just replaced an 18”
woofer!
6
The positive (solid red) and negative (red
and black) cables are still attached to
the woofer terminals. Remove the cables
from their terminals simply by pushing
down on the terminal and pulling out
the cable. The woofer may be removed
from the cabinet enclosure by angling it
to the side ever so slightly.
5
Carefully begin to remove the woofer. It
may be easier to start at the top so the
weight remains rested on the bottom
until a fi rm grip of the entire woofer can
be made.
Caution: The woofer is approximately
20 pounds with the weight unevenly
distributed.
+
-
Push down