Filter
Top Products
VR182
13
CD CHANGER OPERATION
After an optional CD changer has been installed and properly connected, press the reset
button (11) to initialize the installation. Refer to the owner’s manual included with the CD
changer for instructions on installing, loading and using the CD magazine.
Switching to CDC Mode
Press the MODE button (4) until “CDC” appears on the LCD display. Playback begins with the
first CD that the CD changer detects.
Controlling Disc Playback
Pausing Playback
Press the >/|| button (26) to pause the CD player. Press >/|| again to resume playback.
Selecting Tracks
Press the SEEK < (19) or SEEK > button (20) to move to the following or previous track. The
track number appears on the LCD display.
Press and hold the SEEK < or SEEK > button to fast reverse or fast forward. Disc play starts
when you release the button.
Previewing Tracks
Press the SCAN button (6) to play the first ten seconds of each track on the current disc. Press
and hold the SCAN button to play first ten seconds of the first track on each disc in the CD
magazine.
Press SCAN again to stop intro scan and listen to the current track.
Repeat Play
Press the RPT button (5) to continuously repeat the same track.
Press and hold the RPT button to continuously repeat all tracks on the current disc.
Press RPT again to stop repeat playback.
Random Play
Press the SHUF button (7) to play all tracks on the current disc in random order.
Press and hold the SHUF button to select a random disc and play the selected disc in random
order. Press SHUF again to cancel the random playback.
Selecting a Disc
Press the DISC DN (9) or DISC UP button (10) to select the previous disc or next disc.