3-2 Chapter 3: General Instruction
2. Image
You can adjust brightness, contrast, ASCR, Trace Free, sharpness, saturation,
position (VGA only), and focus (VGA only) from this main function.
P1
activate this function.
•
•
Sharpness: the adjusting range is from 0 to 100.
•
Saturation: the adjusting range is from 0 to 100.
•
Position: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
•
Focus: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
•
Brightness: the adjusting range is from 0 to 100. is a hotkey to
3. Color
Select the image color you like
from this function.
P2
Contrast: the adjusting range is from 0 to 100.
ratio function.
ASCR: Select YES or NO to enable or disable dynamic contrast
•
ASCR
Trace Free
Sharpness
Saturation
54
54
Focus
Position
•
Trace Free: