Filter
Top Products
Editing Track Program ("EDIT PROGRAM ")
Playing programmed tracks
Setting ESP (Electronic Shock Protection)
NOTE The factory default is ESP OFF.
Setting Compression Mode for ESP
Turn the Rotary Encoder to select COMPRESSION ON/OFF.
Press the [ENTER] button to end the setting of the Compression mode for ESP.
Remarks
OFF 10 seconds
ON 40 seconds
M P3 1 min 40 seconds 128Kb ps C ompres sion Rate
Turn the Rotary Encoder or press [|<<] and [>>|] to select the desired track. Press the
[ENTER] button to store the desired track at the desired current number. Press [ENTER]
button when the track number is displayed as “--“, in order to return to and edit the first index.
Press the [DTA] button for more than 1 second if you wish to clear the program list. P ress
the [ENTER] button for more than 1 second to end the program edit.
NOTE: This menu is available only in Audio CD mode.Up to
20 songs can be programmed. Any non-programmed
index will be skipped in the playing back order.The
stored track program will be erased when the CD is
ejected from the player.
Press the [BAND] button to play the programmed tracks “NO
DATA” will be displayed if there is no track program stored.
Press the [BAND] button again to return to Normal Play mode.
Turn the Rotary Encoder to select ESP ON/OFF.
Press the [ENTER] button to end the ESP setting.
COMPRESSION Time
Figure 1.5 Comparison table for ESP Compression mode
NOTE The factory default is COMPRESSION OFF.
Controls and Functions
19
Select Version Number and press [ENTER]
The 10-digit version number will be displayed. The left-most 5-digits are used for
Main MCU and the right-most 5-digits are used for CD MCU.
Press the [ENTER] button to end the display of the version number.
NOTE The version number is used to identify the product.
Version Number