Filter
Top Products
FLO TV Introduction
Please refer to the following as an overview to use the FLO TV :
1. Turn the vehicle ignition key to the ON position. Turn on your ADV38FR and select the FLO TV source by pressing the Source button
on the overhead or by pressing the FLOTV Button on the remote. (Note: Watching the service for an extended period of time
with the engine OFF will run down the vehicle's battery.)
2. The VOD108FR screen will show the FLO TV splash screen which will appear for about 30 seconds and then the FLO TV preview
channel or the last channel that was being viewed.
3. Press the ▲ (up arrow) or ▼ (down arrow) key on the remote to change channels.
6. Press the ENTER key on the remote to select a desired channel/show from the Channel Guide.
7. Press the (Information) key on the remote to display the program information related to the current program.
8. Press the (Settings) key on the remote to access the FLO TV user settings menu (e.g. Parental Control, etc.).
9. The Mode key on the remote allows the user to switch between the service and an auxiliary A/V source if one is connected.
10. Visit for more info.
service
FLO TV
FLO TV
4. Press the (Guide) key on the remote to access the FLO TV Channel Guide.
5. The arrow keys ( ) on the remote allow for navigation through the Channel Guide.pqt u
www.flotv.com
31