Filter
Top Products
SETSET
SETSET
SET
TT
TT
T
ING THE CLOCKING THE CLOCK
ING THE CLOCKING THE CLOCK
ING THE CLOCK
1. Switch the vehicle ignition “on” and the radio “on” (radio frequency or disc
track number will be shown on the display panel).
2. Press and hold the time button (T/F) approximately 2 seconds
until the time display appears with AM or PM and the colon ( : ) flashing. Release
the T/F button.
3. Press the Down Tuning button ( ) to adjust the hours and the AM/PM indication,
and the Up Tuning button ( ) to adjust the minutes to the correct time.
4. When the correct time is shown on the display panel, wait 5 seconds for the
display to return to the normal indication.
ERROR CODESERROR CODES
ERROR CODESERROR CODES
ERROR CODES
If a problem should develop while operating the CD player, the following error codes
may be displayed on the display panel:
INF-1: Indicates mechanical malfunction. Press the Reset button
dn
.
INF-2: Indicates mechanical malfunction. Press the Reset button
dn
.
INF-3: Indicates mechanical malfunction. Press the Reset button
dn
.
INF-4: Indicates disc focus error. Press the Reset button
dn
.
INF-5: Indicates disc focus error. Press the Reset button
dn
.
INF-6: Indicates mechanical malfunction. Press the Reset button
dn
.
INF-7: Indicates data error. Press the Reset button
dn
.
INF-8: Indicates disc reading error. Eject the disc, make sure
it is clean, undamaged, and loaded correctly (label side up). Re-load the
disc and check for proper operation or try another disc.
INF-9: Indicates disc lever error. Press eject button.
If the suggested measures do not solve the problem, contact an approved warranty
station near you for further assistance.
1212
1212
12
SETSET
SETSET
SET
TT
TT
T
ING THE CLOCK / ERRING THE CLOCK / ERR
ING THE CLOCK / ERRING THE CLOCK / ERR
ING THE CLOCK / ERR
OR CODESOR CODES
OR CODESOR CODES
OR CODES