Filter
Top Products
128-6691
8 of 16
77
77
7
bmbm
bmbm
bm MANUAL UP/DOWN TUNING (+ / -)
AUTOMATIC SEEK TUNING
Each time the + button is pressed, the
radio will tune higher, seeking the next strong
station and stop. Similarly, each press of the
- button will tune lower and stop at the next
strong station. To manually seek a specific sta-
tion, press the button of the appropriate direc-
tion until the desired frequency is reached.
Pressing either button for longer than 2.0 sec-
onds will cause MANUAL to appear on the dis-
play. Now when the Up or Down tuning button
is pressed momentarily, tuning will occur two
frequency steps at a time. If either button is
pressed and held in Manual mode for 2 sec-
onds, the manual Seek Tuning function is
initiated, whereby the radio will tune rapidly in
the appropriate direction and stop on, or close
to, the desired frequency when the button is
released.
If no further tuning is performed after 5 sec-
onds, AUTO will appear momentarily on the
display, and tuning will revert to the original
tuning mode.
bnbn
bnbn
bn AUTO-STORE TUNING (AS)
PRE-SET SCAN TUNING (PS)
During radio operation, press this button mo-
mentarily to scan the 6 stations in the pre-set
memories of the FM band in use. The unit will
stop at each pre-set station for 10 seconds
before continuing to the next pre-set station
(the frequency on the display panel will flash
during Pre-Set Scan operation). Press the but-
ton again momentarily to stop Pre-Set Scan
operation and remain on the selected fre-
quency in that band.
Pressing the button for longer than 2 seconds
will activate the Auto-Store Tuning feature. The
radio will automatically scan the band in use
and enter strong stations into the pre-set
memory positions for that band. If you have
already set the pre-set memories of that band
to your favorite stations, activating the Auto-
Store Tuning feature will erase those stations
and enter the new strong stations. This feature
is most useful when traveling in a new area
where you are not familiar with the local stations.
bobo
bobo
bo
STATION PRE-SET MEMORIES
To set any of the 6 pre-set memory buttons,
use the following procedure:
1.Turn the radio on and select the desired
band.
2. Select the first station to be pre-set using
the Manual Up/Down or Automatic Seek
Tuning Controls
bm.
3. Press the pre-set button (1-6) to be set
and continue to hold it in. After approxi-
mately 2 seconds, the pre-set number
will appear on the display panel, indicat-
ing that the station is now set into that pre-
set memory position. The station can now
be recalled at any time by pressing that
button.
4. Repeat the above procedure for the re-
maining pre-sets on that band and for the
other 3 bands on the unit.
bpbp
bpbp
bp LIQUID CRYSTAL DISPLAY PANEL
FUNCTIONS
The Liquid Crystal Display (LCD) panel dis-
plays the frequency, time, and all activated func-
tions, including five bar graphs which provide a
visual representation of the audio signal level.
NOTE: It is a characteristic of LCD panels that,
if subjected to cold temperatures for
an extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of
the numbers on the LCD may slightly
decrease. The LCD readout will re-
turn to normal when the temperature
increases to a normal range.
88
88
8
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS