Filter
Top Products
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS
77
77
7
55
55
5
TREBLE CONTROL
To adjust the treble level (Equalizer function inactive),
first select the Treble mode by pressing the SEL
button so the TRE indication appears on the
display panel. Within 5 seconds of choosing the
Treble mode, press the VOL - button to decrease
the treble response or the VOL + button to increase
it as desired. The level will be shown on the display
panel from a minimum TRE -10 to a maximum of TRE
+10 (TRE 00 indicates flat response). The display will
automatically return to the normal indication 5 seconds
after the last adjustment or when another function is
activated.
6 6
6 6
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select
the Balance mode by pressing the SEL button so the
BAL indication appears on the display panel. Within
5 seconds of choosing the Balance mode, press the
VOL - button to adjust the stereo balance to the left
channel speakers or the VOL + button to adjust it to
the right channel speakers. The balance position will
be shown on the display panel from BAL 10L (full
left) to BAL 10R (full right). When the volume level
between the left and right speakers is equal,
BAL L--R will be shown on the display panel. The
display will automatically return to the normal
indication 5 seconds after the last adjustment or
when another function is activated.
7 7
7 7
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select
the Fader mode by pressing the SEL button so the
FAD indication appears on the display panel. Within
5 seconds of choosing the Fader mode, press the
VOL - button to adjust the front-rear speaker balance
to the rear speakers or the VOL + button to adjust
it to the front speakers. The fader position will be
shown on the display panel from FAD 10R (full rear)
to FAD 10F (full front). When the level between the
front and rear speakers is equal, FAD F--R will be
shown on the display panel. The display will
automatically return to the normal indication 5 seconds
after the last adjustment or when another function is
activated.
88
88
8 LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this
feature will boost the bass and treble ranges to
compensate for the characteristics of human
hearing. Press and hold the BAND/LOUD button for
2 seconds to activate this feature and the indication
LOUD ON will appear for 5 seconds on the display
panel. Pressing the button againfor 2 seconds will
deactivate the feature and the LOUD OFF indication
will appear for 5 seconds and then disappear. Mo-
mentarily pressing this button will activate the AM/
FM band function bl.
99
99
9 AUDIO MUTE (MUTE)
This button is used to mute the volume from the
system. By pressing the button, the current display
(radio frequency, or CD player/changer disc/track
indication) will be replaced by a flashing MUTE indi-
cation, and the volume will be muted. Although vol-
ume is muted in CD play mode, the disc/track indica-
tion will continue to increment, indicating continua-
tion of disc play. Pressing the MUTE button again, or
activating any other button, except MODE (AUX),
will return the volume level to the setting in use be-
fore the Mute function was activated. If a disc is
being played, and the CD PAUSE button is pressed,
the Mute function will be deactivated when disc play
is unpaused.
blbl
blbl
bl AM/FM BAND SELECTOR (BAND)
Each time the BAND/LOUD button is pressed
momentarily, the radio band is changed. The indication
FM1, FM2, FM3 or AM will appear on the display
panel according to your selection. When this button
is pressed and held for 2 seconds or more, the LOUD
function 8 is activated.
bmbm
bmbm
bm
UP/DOWN TUN ( / ) BUTTONS
To select a radio station, momentarily press the Up
Tuning ( ) button to advance the unit higher, or
the Down Tuning ( ) button to tune lower within
the selected band. In the LOCAL mode, each
momentary press will advance or lower the tuning
frequency to the next active local station; in the DX
mode, each momentary press will advance or lower
tuning to the next active distant station. When the TUN
button is pressed and held, MANUAL appears
momentarily on the display accompanied by a beep
tone, and the radio is rapidly tuned upward or
downward without pause as long as the button is
pressed. When the button is released, tuning stops
at the displayed station. If further tuning is not
performed within 5 seconds, AUTO momentarily
appears on the display, and tuning reverts to the
previous tuning mode.