Audiovox UMP301 Car Stereo System User Manual


 
UMP301
16
SPECIFICATIONS
CD-R and CD-RW Capability
Depending on media type and method of
"recording/burning", some CD-R/RWs may be
incompatible with this unit. After "recording/
burning", the session must be closed. Please
refer to your software's recommended
procedures for closing a disc/session. Review
your recording software to familiarize yourself
with the correct "recording/burning" procedures.
We recommend using the latest versions of
ROXIO
TM
or NERO
TM
burning software.
This unit will only recognize the CDDA
(Compact Disc Digital Audio), .MP3 and
.WMA formats "recorded / burned" onto a CD-
R/RW. This unit does not support .WAV, .OGG
or other formats.
Technical Specifications
Marketing Power
160 watts Peak, 40 watts X 4
CEA Power
Power Output: 13 watts RMS X 4 channels into
4-ohms @ < 1% THD+N
Signal to Noise Ratio: 70dBA below reference.
(Reference: 1 watt, 4-ohms)
Frequency Response: 20Hz to 20kHz, -3dB
Reference Supply Voltage: 14.4VDC
CD Player
Signal to Noise Ratio @ 1kHz: >90dBA
Frequency Response: 20Hz ~ 20kHz, -3dB
Channel Separation @ 1kHz: > 60dB
ESP (Electronic Skip Protection) Buffer
Size: 2MB (16Mbit, not 16MB)
CD: >10 seconds, nominal
MP3: > 30 seconds, nominal
WMA: >60 seconds, nominal
FM Tuner
Mono Sensitivity @ -30dB: 11dBf
Quieting Sensitivity @ -50dB: 15dBf
Stereo Separation @ 1kHz: >30dB
Frequency Response: 30Hz ~ 12kHz, -3dB
AM Tuner
Sensitivity @ -20dB: 15uV
Signal to Noise @ 1kHz: >50dB
Frequency Response: 30Hz ~ 2kHz, -3dB
General
Power Supply: 11 to 16VDC, negative ground
Fuses: 15 amp, ATO
Dimensions: 7" X 7" X 2" (178mm x 178mm x
51mm)
Specifications subject to change without
notice.