Filter
Top Products
OPERATING INSTRUCTIONS
CD ON-OFF SWITCHNOLUME CONTROL
Turn this knob to the right to turn the unit on.
Continue rotation until the desired volume
level is obtained.
the selected radio band indicator appears on
the display panel.
<V LEFT/RIGHT BALANCE CONTROL
Turn this knob to the left or right to obtain the
desired balance between left and right speak-
ers.
@ LOCAL-DIST ANT SWITCH
This two position switch is incorporated to allow
maximum reception in both weak and strong
FM signal areas. When tuned to a weak t
(distant) station, push the switch in. This will
1allow maximum signal to the receiver. When in
...
an extremely strong signal area (local), release
Ithe switch. This will eliminate all weak signals
and suppress overly strong signals so as to
Iavoid overloading the receiver input. When
moving out of a strong signal area, return the I
switch to the "distant" position. I
@ TONE CONTROL
Turn this knob either to the left or right to
obtain the desired tone response. Turn it to
the right to increase the treble or to the left to
increase the bass.
@ AM/FM BAND SELECTOR
Each time this button is pressed, the radio
band changes. According to your selection,
Note: The Local-Distant switch only affects FM
signals.