Filter
Top Products
- 17 -
Modes Of Operation
SETTING THE CABLE TV MODE
1) With power off, press the SET button three times to enter the cable configuration mode. AIR appears on the
display . Then press the 1 preset to button switch from broadcast TV(VHF or UHF) to cable TV.(CAbl will
appear on the VFD.)
2) Press the SET button again to display the cable system mode (Standard, Irc, Hrc).
3) Press the 1 preset button to select the cable mode(Std/Irc/Hrc)
4) When the desired mode is reached, press the ON/OFF button.
SETTING THE PRESETS (FOR AM AND FM OR TV MODES)
1) Turn to the desired channel/broadcast frequency.
2) Press the SET button ; the display flashes.
3) Select desired Preset (1~6 button).
SETTING THE SPEAKER MODE
1) With power off, Press the SET button five times to enter the speaker configuration mode. “I SP(or E SP)”
appears on the VFD.
2) Press the 1 preset button to toggle between the “I SP” and “E SP”
3) When the desired mode is reached, press the ON/OFF button.