Filter
Top Products
Operating Instructions
128-5987
13
For DVD:
When the
REPEAT
button is pressed:
RPT CHAPT = The current chapter will be repeated
RPT TITLE = The current title will be repeated
REPEAT OFF = Repeat mode will be switched off
3.9.2 Camera Angle (DVD)
Some DVD discs may contain scenes which have more than one viewing angle.
For these discs, the same scene can be viewed from a different angle by using the
ANGLE
button as
follows:
NOTE:
This function will only operate on discs where different camera angles have been
recorded.
1) During DVD playback, press the
ANGLE
button.
“ANGLE x/y”
will appear, where x represents the current camera angle, and y represents the
total available camera angle.
2) Press the
ANGLE
button until the preferred angle is selected.
The ANGLE selection will cycle through all available camera angles.
3.9.3 Audio Function (VCD/DVD)
The audio function operates only for discs that have multiple audio soundtracks.
During VCD playback, press the
AUDIO
button until the desired audio is selected.
During DVD playback, press the
AUDIO
button.
“AUDIO x/y”
will appear, where x represents the current audio stream and y represents the
total available audio streams.
Press the
AUDIO
button until the preferred audio is selected.
The audio selection will cycle through all available audio streams.
RPT CHAPT RPT TITLE REPEAT OFF
AUDIO STEREO AUDIO LL AUDIO RR