Filter
Top Products
128-6323
10 of 20
11) Guide the cable through the side
opening of the Mounting Tray and
plug it into the Monitor. Make
sure the connector locks into
place. Insert the Monitor into the
Mounting Tray and secure the
cable using tie wraps or screws
12) Turn the Monitor around and in-
sert it into the Mounting Tray
housing. Snap into place.
10) Lay the flaps of headrest mate-
rial down into the recess and in-
sert the Mounting Tray into the
recess. Check for fit. If it does
not fit properly, you may need to
remove some more foam.
NOTE: The Mounting Tray will need
to be secured to the headrest, either
by using tie straps, screws, ect..
13) Connect the Monitor power input
plug to a DC power source (Red
plug +12 VDC, Yellow plug +12
VDC Constant and Black plug (-)
to ground).
14) Connect the external video
source output signal (from VCP/
DVD, TV Etc.) to the VIDEO IN
jack. Test the system to verify
proper installation.
9