Filter
Top Products
7
10) Guide the cable through the side
opening of the Mounting Tray and
plug it into the Monitor. Make sure
the connector locks into place.
Insert the Monitor into the Mount-
ing Tray and secure the cable
using tie wraps or screws
11) Turn the Monitor around and in-
sert it into the Mounting Tray hous-
ing. Snap into place.
9) Lay the flaps of the headrest mate-
rial down into the recess and in-
sert the Mounting Tray into the re-
cess. Check for fit. If it does not fit
properly, you may need to remove
some more foam.
NOTE: The Mounting Tray will need to
be secured to the headrest, either
by using tie straps, screws, etc...
12) Connect the Monitor‘s DIN Cable
to the external video source out-
put signal (from VCP/DVD, TV
Etc.)Test the system to verify
proper installation.