Filter
Top Products
8
Fan Bracket Mounting*
The monitor can be mounted on a variety of surfaces using the
supplied fan bracket.
Select a location for the monitor and find a suitable surface to mount
the fan bracket. The mounting location* should be as firm, flat and
smooth as possible to ensure maximum adhesion. If the area is not
flat the bracket can be bent to conform to the shape of the surface.
Clean the area thoroughly and make sure that is dry before attempting
to mount the bracket. Remove the backing from the adhesive pad on
the bottom of the bracket and carefully place it in the desired mounting
location and press down firmly. Carefully align the mounting hole on
the bottom of the monitor with the screw on the top of the bracket.
Release the locking lever and turn the locking knob until it is tight.
Adjust the monitor angle and tighten the locking lever.
*Note: Please read the important notice on page three about monitor
location.
Screw
Spanner
Locking Lever
Locking Knob
Screw