Filter
Top Products
Figure 7. Installing The Monitor Shroud
10. Snap the screen into the visor mounting shroud Screw the screen to the visor mounting
shroud using the 4 screws (supplied).
11. Install the 4 screw caps (supplied) in the holes on the 4 corners of the assembly.
Figure 8. Installing The Monitor
12. Reinstall the sun visor in its original position using the attaching hardware removed in
step 1. of this installation procedure.
13. Route the power/signal harness from the sun visor down the A-Pillar and behind the
dashboard for connections to the video equipment and/or backup camera.
6