Audiovox MMD85 Car Video System User Manual


 
21
MMD85
OPTIONAL ACCESSORIES
WIRELESS HEADPHONES
The MMD85 includes a built in infrared transmitter for use with Movies 2 Go wireless
headphones (PN MMIRHS). Turning the Wireless Headphone switch ON will activate
the internal IR receiver and the volume can then be adjusted separately with the controls
on each headset. Any number of wireless headphones can be used, but all must be
within direct line of sight from the transmitter. See the documentation accompanying
your Movies 2 Go wireless headphones for more detailed information.
Wired Headphones
There are two 1/8” headphone jacks on the MMD85 that can be used with any standard
wired stereo headphones. These jacks are controlled by the volume up/down buttons on
the MMD85 remote control.
Wired FM Modulator
The MMD85 has an audio line output for connection to an optional FM modulator (P/N
FMM100A), that allows you to listen to the MMD85 audio signal by tuning your vehicle’s
radio to the station that the FM modulator is set to. Whenever the RF modulator is on,
broadcast reception on the vehicles radio will be poor. Switching off the FM modulator will
allow normal radio reception.