Filter
Top Products
128-6887
5 of 12
-5-
bn AUTO-STORE (AS) / PRE-SET SCAN (PS) TUNING
Press this button momentarily to scan the 6 stations in the pre-set
memories of each FM band in sequence (or the AM band if in use).
The unit will stop at each pre-set station for 5 seconds before continu-
ing to the next pre-set station. (The preset number will flash during
Pre-Set Scan operation.) Press the button again momentarily to stop
Pre-Set Scan operation and remain on the selected frequency.
Pressing the button for longer than 2 seconds will activate the Auto-
Store Tuning feature. If the radio is in the LOCAL mode, it will auto-
matically scan each band in sequence and enter strong stations into
the pre-set local memory positions for each band. If you have already
set the pre-set memories of that band to your favorite stations, activat-
ing the Auto-Store Tuning feature will erase those stations and enter
the new strong stations. If the radio is in the distant (Dx) mode, weaker,
more distant stations will be preset into each band. This feature is most
useful when traveling in a new area where you are not familiar with the
local stations.
bo STATION PRE-SET MEMORIES
To set any of the 6 preset memory buttons, use the following proce-
dure:
1. Turn the unit on and select the desired band.
2. Select the first station to be preset using the Manual Up/Down
or Up/Down Seek Tuning functions .
3. Press the preset button to be set and continue to hold the
button in. A confirming tone will be heard and the preset
number will appear on the display panel. The station is now set
into the memory of that preset button and can be recalled at
any time by momentarily pressing that button.
4. Repeat the above procedure for the remaining 5 presets on
the band in use and for the other 3 bands of the unit.
bp FM STEREO INDICATION
During FM radio operation, under normal reception conditions, the
unit receives in the stereo mode, as indicated by ST on the display
panel when listening to an FM stereo signal. If the signal is not broad-
cast in stereo or too weak for comfortable listening, or if AM (monau-
ral) reception is selected, ST will disappear from the display panel,
indicating stereo reception in no longer in effect. To return to the ste-
reo reception mode, select a reasonably strong FM stereo station so
that the ST indication returns.
bq LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time,
and activated functions.
NOTE: It is a characteristic of LCD panels that, if subjected to cold
temperatures for an extended period of time, they may take
longer to illuminate than under normal conditions. In addi-
tion, the visibility of the numbers on the LCD may slightly de-
crease. The LCD readout will return to normal when the tem-
perature increases to a normal range.
br MODE SELECT BUTTON
When listening to radio with a disc loaded in the unit (
on the
display panel), press this button to return to disc play mode from the
beginning of the last track in play.
Conversely, during disc play, press this button to return to radio opera-
tion; remains displayed unless the disc is ejected and removed
from the unit.
bs EQUALIZER (EQ) BUTTON
The EQ button applies preset sound effects to the unit’s audio output
signal. The EQ button, when pressed, will activate one of the following
operating modes: CLASSICS, POP M, ROCK M, DSP OFF or FLAT.