Filter
Top Products
CD CHANGER CONTROLS
Built into this radio are controls to operate an optional CD changer.
Please check with your Prestige car stereo specialist for
recommendations of the models that will work with this radio.
Adjustment of the audio functions (volume, tone, balance, and
fader) for the CD changer operate in the same manner as they do
for radio play. The following controls will operate the CD changer
when it is installed and connected to this radio. Refer to the owner’s
manual included with the CD changer for instructions on the
installation and correct loading and use of the CD magazine.
dn CD CHANGER MODE SELECTOR (CD)
During radio, CD, or AUX input play, press this button to select
operation of the CD changer as shown by “CDC” on the display
panel. Play will be indicated by the rotating disc symbol and the
disc and track numbers on the display panel. If a new magazine
has been loaded into the changer, play will begin from the first
track of the first disc in the magazine. If a magazine was already
in the changer, play will resume from the track on the disc
previously in play.
do & dp DISC SELECT (D.DN & D.UP)
These buttons are used to select the desired disc for play. To
advance to a higher number disc, press the D.UP button dp. To
return to a lower number disc, press the D.DN button do. The
number of the disc in play will be shown on the display panel.
dq TRACK SELECT ( / )
This button is used to quickly select the beginning of a particular
track. With each momentary upward tap of the button, the next
higher track number will be selected as shown on the display panel.
Similarly, with each momentary downward tap of the button,
the next lower track number will be selected.
-11-
dr CUE/REVIEW FUNCTIONS
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Press and hold the button
upward to advance rapidly in the forward direction or downward
to advance rapidly in the backward direction. During either
function, the elapsed time within each track will automatically be
shown on the display panel.
When the Cue function is held until the end of the last track is
reached or the Review function is held until the beginning of the
first track is reached, the Cue or Review function will stop and the
“PAUS” indication will appear until the button is released.
ds PAUSE/PLAY SELECTOR (PAUSE)
During disc play, press this button to temporarily stop play of the
disc (the indication will flash and “PAUS” will appear on the
display panel). Press the button again to resume play of the disc
from the point at which it was stopped. Pause mode will also be
canceled by activating any other disc function.
dt TRACK/DISC REPEAT (RPT)
When the Repeat button is pressed, the REPEAT indication will
appear on the display panel and play of the selected track will be
continually repeated until the Track Repeat mode is canceled by
pressing the Repeat button again or by activating the Shuffle du
or Scan el functions.
When the Repeat button is pressed and held longer than 2 seconds,
the DISC and REPEAT indications will appear on the display
panel and play of the selected disc will be continually repeated
until the Disc Repeat mode is canceled by pressing the Repeat
button again or by activating the Shuffle du or Scan el functions.