Filter
Top Products
momentary press function is activated and two beep tones
whenever a press-and-hold function is activated (i.e. Auto-Store
Tuning, etc.). To deactivate this feature, press the button again for
longer than 2 seconds ( the indication will disappear from the
display panel).
4 TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
the Select button 3 so that the “TRE” indication appears on the
display panel. Within 5 seconds of choosing the Treble mode,
turn the Level Control 2 clockwise to increase or counter-clockwise
to decrease the treble response as desired. The treble level will
be shown on the display panel from a minimum of -7 to a maxi-
mum of +7 (0 is flat response). The display will automatically return
to the normal indication 5 seconds after the last adjustment or when
another function is activated.
5 BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the Select button 3 so that the “BAS” indication appears on the
display panel. Within 5 seconds of choosing the Bass mode, turn
the Level Control 2 clockwise to increase or counter-clockwise to
decrease the bass response as desired. The bass level will be
shown on the display panel from a minimum of -7 to a maximum of
+7 (0 is flat response). The display will automatically return to the
normal indication 5 seconds after the last adjustment or when an-
other function is activated.
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button 3 so that the “BAL” indication
appears on the display panel. Within 5 seconds of choosing the
Balance mode, turn the Level Control 2 clockwise or
counter-clockwise to adjust the balance as desired. The
balance position will be shown on the display panel from “BAL.L 15”
(full left) through “BAL.R 15” (full right). When the volume level
between the left and right speakers is equal, “BAL 0” will be shown
on the display panel. The display will automatically return to the
normal indication 5 seconds after the last adjustment or when an-
other function is activated.
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode
by pressing the Select button 3 so that the “FAD” indication ap-
pears on the display panel. Within 5 seconds of choosing the
Fader mode, turn the Level Control 2 clockwise or counter-
clockwise to adjust the front-rear speaker balance as desired.
The fader position will be shown on the display panel from
“FAD.R 15” (full rear) through “FAD.F 15” (full front). When the
level between the front and rear speakers is equal, “FAD 0” will be
shown on the display panel. The display will automatically return
to the normal indication 5 seconds after the last adjustment or
when another function is activated.
8 LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will boost
the bass and treble ranges to compensate for the characteristics of hu-
man hearing. Press the button to activate this feature and the
indication “LOUD” will appear on the display panel. Pressing the
button again will deactivate the feature (the “LOUD” indication will
disappear from the display panel).
-2-