Filter
Top Products
-6-
is represented by the two outer bar graphs. As the volume is
increased, the number of illuminated segments will increase. The
left and right channels are represented by the three inner and cen-
ter bar graphs whose illuminated segments increase and decrease
as a function of the signal strength applied to the left and right
channels. As the signal increases, the number of illuminated seg-
ments will increase and vice-versa.
bs MODE SELECTOR (MODE)
This button is used to select the radio, CD player or CD changer (if
installed) playback mode. Each press of the button will select a
different mode as indicated on the display panel.
During CD player operation, this button may be used to change to
radio CD player or CD changer mode without ejecting the disc.
The DISC indication will remain on the display panel to show that
the CD changer is operating. Press the button again to return to
CD player mode and resume play of the disc from the point at
which it was stopped.
bt DISC SLOT
With the motorized front panel in the down position, gently insert
the disc into the slot (label surface facing up) until the soft-
loading mechanism engages and pulls the disc in. The LOAD
indication will momentarily appear on the display panel followed by
the total playing time of the disc. The (
) indication illuminates
and becomes animated, the
symbol lights, and the track num-
ber and elapsed time will appear on the display panel.
CAUTION: This unit is designed for play of standard 5" (12cm)
compact discs
ONLY. Do not attempt to use 3" (8cm)
CD-Singles in this unit, either with or without an adapter,
as damage to the player and/or disc can occur. Such
damage will not be covered by the Warranty on this
product.
Once the CD disc is ejected if the disc is not removed from the
disc slot in 15 seconds the soft-loading mechanism will engage
and pull the disc in to radio to prevent the disc from becoming
damaged.
bu TRACK SELECT ( + / - )
The Track Select function of the TUNE/SEEK/TRACK buttons are
used to quickly access the beginning of a particular track when a
disc is in play. Each time the Forward TRACK Select ( +
) side
of the button is pressed, the next higher track number will be se-
lected as shown on the display panel. Similarly, each time the
Backward TRACK Select (
- ) side of the button is pressed, the
next lower track number will be selected as shown on the display
panel.
cl CUE/REVIEW FUNCTIONS ( + / - )
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Press and hold the Cue ( +
)
side of the button to advance rapidly in the forward direction (the
advancing disc playing time will be shown on the display panel), or
the Review (
- ) button to advance rapidly in the backward direc-
tion (the decreasing disc playing time will be shown on the display
panel). During either function, the elapsed time within each track
will automatically be shown on the display panel.
cm TRACK ONE POSITION (TOP)
The Track One Position function is used to quickly return to the
beginning of the current CD in play (Track 1).
cn TRACK SCAN SELECTOR (SCN)
During disc play, press this button to play the first 10 seconds of
each track on the disc (SCAN) will appear on the display panel).
When a desired track is reached, press the SCAN button again to
cancel the function (SCAN will disappear from the display panel)
and play of the selected track will continue. Scan mode will also
be canceled by activating Repeat Play
co, or Random Play cp.