Filter
Top Products
4. SKIP / SEARCH
This button selects between SKIP and SEARCH
modes. In “SKIP mode” the TV tuner will tune and
stop on channels that are programmed into memory
when the CHANNEL UP/DOWN buttons are used.
When the SKIP mode is disabled, the TV will stop
on all active channels.
5. ERASE / WRITE
While tuned to a channel, pressing this button will
store or erase the channel from memory. The stored
channel numbers are displayed in “GREEN” on the
LCD display screen, and the non-stored channel
numbers are in “RED”.
6. Channel Up (p) Button
Use this button to increase the channel number to the
desired channel and to scroll upward in menu
options.
7. MUTE Button
Press this button to mute the audio while using wired
headphones.
Pressing the button again restores sound to the
previously set level.
8. ENTER Button
Used to select or switch a highlighted selection.
*Function control is available on the unit and the remote control.
DVD Remote Function Descriptions
1. DVD POWER ON/OFF Button*
Press this button to turn the PROVD8 on. The
DVD or selected video source will be displayed
on screen and the picture will appear in a few
seconds. Press the button again to turn the
PROVD8 off.
2. SOURCE Button
Video equipment connected to the AUDIO/
VIDEO inputs can be selected and displayed on
the LCD display screen by pressing this button.
Each time the button is pressed, the Audio /
Video source will change in the following
sequence: DVD, TV, AV1 and AUX.
3. AUTO MEMORY
When the AUTO MEMORY button is pressed,
all channels are searched and channels that are
detected with signals of sufficient levels are
automatically stored. Please refer to page 3 for
more information on TV reception.
-5-