Filter
Top Products
Turning the PROVE8 On or Off
1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen
downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while
the system is in use.
2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use
the internal backlighting will illuminate the controls.
3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to
optimize the picture quality.
4. Remember to turn the unit off and pivot the LCD to the locked position when not in use.
CHANNEL TUNING SET UP
In order to easily access all available TV channels, it may be necessary to perform channel auto-programming whenever the
vehicle’s geographic location has changed, i.e. city to city, weak signal area.
Use the Source Select Button on the Remote Control to select TV mode.
1. Press the AUTO MEMORY button on the Remote Control Unit or the AUTO PROGRAM button on the drop down video
unit. You will see the TV cycle through all its channels. The built-in micro-processor will automatically store each
channel that is actively broadcasting in your area.
2. (A) To tune only strong clear channels with the CHANNEL UP/DOWN buttons, press the SKIP/SEARCH button on the
Remote Control Unit until “SKIP MODE ON” is displayed on the bottom of the screen. The TV will now tune only to
strong active channels when the UP or DOWN buttons are used on the monitor or remote control.