Filter
Top Products
UCD300/UMP400
11
CD PLAYER OPERATING INSTRUCTIONS
Disc Slot
With the label surface facing up, gently insert
the disc into the slot until the soft-loading
mechanism engages and disc play begins. “S --
CDP ----” will appear momentarily. Once
loaded, the ( ) indication will become
animated and the track number and elapsed
time will appear in the display.
NOTE: The unit is designed for play of
standard 5” (12 cm.) compact discs only. Do
not attempt to use 3” (8 cm.) CD singles in
this unit, either with or without an adaptor,
as damage to the player and/or the disc may
occur. Such damage will not be covered by
the warranty on this product.
Track Selector (TUNE/
TRACK)
The Track Select functions are used to quickly
access the beginning of a particular track. Each
time the TUNE/TRACK ( ) button (6a) is
pressed, the next higher track number is
selected, as shown on the display panel. Each
time the TUNE/TRACK ( ) button (6b) is
pressed, the next lower track number is
selected, as shown on the display panel.
Cue/Review Functions
Press and hold the TUNE/TRACK ( ) button
(6a) to advance rapidly forward or the TUNE/
TRACK ( ) button (6b) to advance rapidly
backward. During either function, the elapsed
time of each track will be shown on the display
panel.
Disc Play/Pause Select
Press the 1 PAU or button (16) to freeze
disc play. “S-PAUSE” will appear on the display.
Press 1 PAU or again to resume disc play
and the “S-PAUSE” indication will disappear.
Track Scan Select (SCN)
During disc play, press the 2 SCN button (17) to
play the first 10 seconds of each track.
(“S-SCN” will be displayed with the track
number). When a desired track is reached,
press the 2 SCN button again to cancel the
function and play the selected track. Track
Scan mode can also be canceled by activating
the Repeat Play (18) or Random Play (19)
functions.
15
6
6
16
17
AS/PS MODE
2SCN
3RPT
4SHF
RELEASE EJECT
PWR
LOC
SEL
MUT
EQ
MON
DSP
BAND
TUNE
TRACK
LOUD
5CD-
6CD+
/
UCD300
AM/FM/CD RECEIVER
1
PAU
>>
>
17
6b
6a
15
16