Filter
Top Products
-11-
External Auxiliary A/V Stereo Inputs (Aux
Video 2)
These inputs are provided to facilitate the temporary
connection of optional audio/video equipment, such as
a camcorder or video game system. To play a source
with these inputs, an RCA patch cord is required to
connect the audio / video signals to their respective
j
acks. Mono audio sources will require the use of an
RCA Y-cable (P/N 0892165) to connect to both right
and left inputs, if patch cords are installed into the
AUX inputs, the AUX INPUT 2 will be temporarily
bypassed. Once the connections have been made,
turn the VOH702 on and press the source button on
the VOH702 or the TV / Video button on the remote
control until “Video 2” is displayed on the screen. The
unit will now play the audio and video signals from the
accessory connected. The remote control will not
operate the accessory components.
VOH702 Jack Panel
OPTIONAL ACCESSORIES
Wired Headphones
There are two 1/8” headphone jacks on the VOH702
that can be used with any standard stereo
headphones. These jacks are controlled by the
volume up/down buttons on the VOH702 or the
remote control.
Wireless Headphones
The VOH702 includes a RF transmitter
(P/N WTXRF01) for use with optional Audiovox
wireless headphones. Tuning the headphone switch
on, and wearing them activates the internal micro
switch, (which includes a tuning knob to tune into the
preset frequency on the RF transmitter), which will
activate the internal RF receiver and the volume can
be adjusted separately with the controls on the
headset. See the documentation accompanying your
Audiovox wireless headphones.