Filter
Top Products
-12-
Wired FM Modulator (P/N 0190730)
Your video system may be equipped with an RF
modulator, that allows you to listen to the VOH702’s
audio signal by tuning your vehicle’s radio to the
selected frequency, (88.7 or 89.1- check with your
installer) and tuning on the remote mounted RF
modulator switch. (In most cases this toggle switch
will be located underneath the driver’s side of the
dash, check with your installer for the exact location.)
Whenever the RF modulator is on, broadcast radio
reception will be poor. Turning the remote mounted
toggle switch off will allow for normal radio reception.
Video Output
The VOH702 provides a video output for an optional
video monitor(s). This output will provide a video
signal that duplicates the signal displayed by the
VOH702 to an additional monitor or video display.
Please see your installer for more information.
Audiovox Video Cassette Player (Aux
Video 1)
In most installations a VCP will be connected to the
“Video 1” input. To view a video cassette, turn the
AVP7000/ AVP7285 on and press the source button
on its control panel or the TV/Video button on the
remote control unit until “Video 1” is displayed on the
screen. The VCP may also be operated with the
remote or the buttons on its face. Inserting a tape
into the VCP will turn it on and automatically activate
the play mode. If a rewound tape had been loaded
into the VCP, prior to its activation press play on the
VCP or the remote control to view the tape. For
more information see the owner’s manual
accompanying your VCP.