Filter
Top Products
AXIS P7216 Video Encoder
Power connector - 2-pin terminal block for power input. Use a limited power source (LPS) with
either a rated output power limited to £100 W or a rated output current limited to £5 A.
I/O terminal connector - Use in applications for e.g. motion detection, event triggering, time
lapse recording and alarm notications. In addition to an auxiliary power and a GND pin, the I/O
terminal connector provides the interface to:
• Digital output – For connecting external devices such as relays and LEDs.
Connected devices can be activated by the VAPIX® Application Programming
Interface, output buttons on the Live View page or by an Action Rule. The
output will show as active (shown under System Options > Ports & Devices) if
the alarm device is activated.
• Digital input – An alarm input for connecting devices that can toggle between
an open and closed circuit, for example: PIRs, door/window contacts, glass
break detectors, etc. When a signal is received the state changes and the input
becomes active (shown under System Options > Ports & Devices).
RS-485/RS-422 connector - Two 2-pin terminal blocks for RS-485/RS-422 serial interface used to
control auxiliary equipment, e.g. PTZ devices.
Specications
Operating Conditions
The casing of AXIS P7216 is not approved for outdoor use. The product may only be installed in
indoor environments.
Product Temperature Humidity
AXIS P7216 0 °C to 50 °C
(32 °F to 122 °F)
20-80% RH (non-condensing)
Power Consumption
Product Power supply
AXIS P7216 AXIS PS-P power supply
10