Filter
Top Products
Specification
NOTE : Specifications & design subject to change without notice for improvements. Tested at
14.4v DC.
DIMENSIONS
(W x H x D)
FUSE RATING
INPUT
IMPEDANCE
4 OHMS @
1% THD
(10Hz - 250Hz)
2 OHMS @
1% THD
(10Hz - 250Hz)
LOW PASS
FILTER
1 OHMS @
1% THD
(10Hz - 250Hz)
PHASE
CONTROL
SUBSONIC
FILTER
FREQUENCY
RESPONSE
(-1dB)
SIGNAL TO
NOISE RATIO
(`A' WTD)
INPUT
SENSITIVITY
0~180 degrees
(VARIABLE)
15Hz-45Hz @ 24dB
(VARIABLE)
50Hz-250Hz @ 24dB
(VARIABLE)
2000W x 1
1200W x 1
3200W x 1
13”x2.5”x26”
330x63x660mm
10Hz-250Hz
>100dB
240mV - 6V
22k Ohms
N/A - minimum 80 amp
is recommended
11