Filter
Top Products
behringer.com
10 REFERENCE AMPLIFIER A500 User Manual
Specifications5.
OUTPUT POWER
RMS Power
Stereo Mode (both channels driven)
8 Ω / 1 kHz @ 1 % THD 125 W
4 Ω / 1 kHz @ 1 % THD 185 W
Bridged Mono
8 Ω / 1 kHz @ 1 % THD 375 W
Peak Power
Stereo Mode (both channels driven)
8 Ω / 1 kHz 175 W
4 Ω / 1 kHz 300 W
Bridged Mono
8 Ω / 1 kHz 600 W
Input Sensitivity 1.64 V
Distortion <0.01 %
Frequency Response 20 Hz - 20 kHz, +0/-1 dB
Voltage Gain: 26 dB
Damping Factor > 220 @ 8 Ω
Input impedance 10 kΩ unbalanced, 20 kΩ balanced
Signal-to-Noise >100 dBA
Controls
Front POWER switch
GAIN control (channel 1 and 2)
Rear MODE switch
Indicators
POWER Blue LEDs
CLIP (per channel) Red LEDs
PROT (per channel) Yellow LEDs
SIGNAL (per channel)
-30 dB ~ -6 dB Green LEDs
SIGNAL (per channel)
-3 dB; 0 dB Yellow LEDs
Connectors
Inputs Balanced XLR, ¼" TRS , RCA
Outputs ¼'' TS connectors and ”touch-proof”
binding posts
Circuit protection
Cooling Convection-type
Amplifier protection Short circuit and overload
Output circuit type Class AB
Power supply / Voltage (Fuses)
USA / Canada 120 V~, 60 Hz (T 10 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 5 A H 250 V)
Europe 230 V~, 50 Hz (T 5 A H 250 V)
Japan 100 V~, 50-60 Hz (T 10 A H 250 V)
Power consumption 660 W
Mains connector Standard IEC receptacle
Dimensions/weight
Dimensions (H x W x D) 19 x 10.85 x 4"
482.6 x 257.5 x 101.6 mm
Weight 18.5 Ibs / 8.4 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.