Filter
Top Products
On-Screen Display (OSD) Menu24
English
Aspect
Ratio
Adjust image aspect
ratio.
Use the and buttons on
the remote control or the
Vo lu m e and Volu me
buttons on the display to
change selection.
• Full Screen - Enlarge the
standard 4:3 video signal (e.g.
TV signal) to 16:9 full screen
video signal. When the
original input video source is
16:9 in ratio (e.g. DVD
signal), no change will occur.
• 4:3 Format - Display the
standard 4:3 video signal (e.g.
TV signal) in the center of
the screen at the ratio of 4:3.
The screen does not change,
but black blocks appears in
the left and right sides of the
screen. When the input video
source is 16:9 in ratio,
deformation will occur on
the screen.
• Letterbox -Fill the entire 4:3
screen with a 4:3 video signal.
The redundant part on the
upper and bottom of the
image will be removed and
the image will extend
vertically and horizontally to
fill the full screen. When the
input video source is 16:9 in
ratio (e.g. DVD signal), no
change will occur.
• Anamorphic - Fill the entire
screen with a 4:3 video signal.
Some deformations may be
identified on the edge of the
image. When the input video
source is 16:9 in ratio (e.g.
DVD signal), no change will
occur.
• Real - Display the actual size
of the video source without
zooming.
Auto
Format
Set the display to auto-
matically adjust screen
aspect ratio when the
SCART input is used.
Use the and buttons on
the remote control or the
Vo lu m e and Volu me
buttons on the display to
change selection.
• Yes
• No
Video
Input
Select video signal input
source for PIP/PBP
function.
Use the and buttons on
the remote control or the
Vo lu m e and Volu me
buttons on the display to
change selection.
TV, AV1, AV1 RGB, AV2, AV2-
S, AV3, AV3-S, AV4, AV4-S
Graph-
ics
Input
Select graphics signal
input source for PIP/
PBP function.
Use the and buttons on
the remote control or the
Vo lu m e and Volu me
buttons on the display to
change selection.
• PC
• Component 1
• Component 2
• DVI
Reset All
Settings
Restore all settings to
default values.
Press the OK button on the
remote control or the INPUT
button on the display to reset.
Downloaded From TV-Manual.com Manuals