Filter
Top Products
10
Tuning into a station
There are various ways of tuning to a
station.
Automatic seek tuning
➮ Press the or button 8.
The unit tunes to the next receivable
station.
Setting the sensitivity of station
seek tuning
You can choose whether to tune only
to strong reception stations or to also
tune to those with a weak reception.
➮ Press the MENU button 8.
➮ Keep pressing the or button
8 until “SENS HI” or “SENS LO”
appears in the display
“SENS HI” means that the tuner is set
high to sensitivity. “SENS LO” means it
is set to the low sensitivity setting. If
“SENS LO” is selected, “LOC” lights up
in the display.
➮ Set the required sensitivity using
the and buttons 8.
When you have finished making your
changes,
➮ press the MENU button 8.
Tuning into stations manually
You can also tune into stations manu-
ally.
➮ Press the or button 8.
Storing station presets
Storing stations manually
➮ Select the required memory bank
(FM1, FM2 or FMT) or the AM
(MW/LW) waveband.
➮ Tune into the station.
➮ Press one of the station buttons
1-6 < for longer than one second
to store the station in that preset
memory.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region. The stations are stored in the
FMT or AM (MW/LW) memory depend-
ing on the selected frequency band.
Note:
● Any stations that were previously
stored on this memory bank are
deleted in the process.
➮ Press and hold the BAND/TS
button = until seek tuning begins.
The station storing procedure begins.
Once the procedure finishes, all the
stored stations are played briefly.
Listening to station presets
➮ Select the memory bank on which
the station was stored.
➮ Press the preset station button 1-6
< of the station you want to listen
to.
RADIO MODE