Filter
Top Products
9
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Radio mode
Switching to radio mode
If you are in CC or CD changer mode,
➮ keep pressing the SOURCE 9
button until the radio mode
appears in the display together with
the memory bank and frequency.
Selecting the frequency band /
memory bank
This unit can receive programs broad-
cast over the FM and AM (MW/LW) fre-
quency band. There are three preset
memory bank for the FM range and one
for the AM range. Six stations can be
stored on each memory bank.
Selecting the FM memory bank
To switch between the FM memory bank
FM1, FM2 and FMT,
➮ press the BAND/TS button =.
Selecting the AM (MW/LW)
waveband
To select the AM (MW/LW) waveband,
➮ keep pressing the BAND/TS button
= until AM (MW/LW) appears in
the display.
Setting the mute level
You can set the unit’s mute volume level.
➮ Press the MENU button 8.
➮ Keep pressing the or button
8 until “MUTE LVL” appears in
the display.
➮ Set the mute level using the and
buttons 8.
When you have finished making your
changes,
➮ press the MENU button 8 twice.
Mute while telephoning
If your unit is connected to a mobile tele-
phone, the car radio’s volume will be
muted as soon as you “pick up” the tele-
phone. “TEL CALL” flashes in the dis-
play.
This requires to the mobile telephone
be connected to the car radio as de-
scribed in the installation instructions.
The volume will be reduced to the con-
figured mute volume level.
ADJUSTING THE VOLUME RADIO MODE