Filter
Top Products
15
ACD 9430
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Restart following interruption of
power supply
(Code system switched on)
• Switch on the set.
“Cod” will appear in the display.
• Briefly press preset button 1, “000” will
appear in the display.
• Enter the code number given in the
Blaupunkt car radio passport:
Preset button 1 only allows to choose
“0” or “1”. The first “0” will not be dis-
played.
Example: the code number is 0521.
- Press preset button 1 until “000” ap-
pears in the display.
- Press preset button 2 five times,
“500” appears in the display.
- Press preset button 3 twice, “520”
appears in the display.
- Press preset button 4 once, “521”
appears in the display.
• To confirm the code number:
Press the
upper part of the rocker
switch .
Your car radio is now ready for operation.
If three dashes appear again in the display,
you have entered a wrong code number.
Now it is essential to enter the correct code
after the waiting period has elapsed (Cod in
the display).
If the radio is turned off before the waiting
period has elapsed, then the waiting period
restarts as soon as the radio is turned on
again.
Switching the code system off
• Turn off the radio.
• Simultaneously press preset buttons 1
and 4 and hold them down.
• Turn the set on.
“Cod” will appear in the display.
• Enter the code number given in the
Blaupunkt car radio passport and con-
firm: See example “Restart following
interruption …”.
The code system is now deactivated.
Amplifier Section
ON/OFF
To switch on the set:
• Turn button 1 clockwise.
To switch off the set:
• Turn button 1 counterclockwise.
Bass and Treble Control
Bass Control
To adjust the low frequencies:
• Press the AUD button 2.
Display 9 gives you bas plus a num-
ber between -7 and +7.
• Press rocker switch </> 7 on the right
to boost the bass frequencies or on the
left for bass reduction. The number on
the display 9 changes between -7 and
+7.
Treble Control
To adjust the high frequencies:
• Press the AUD button 2 until tre and a
number between -7 and +7 appears on
the display.
• Press rocker switch </> 7 on the right
to boost the high frequencies or on the
left for treble reduction. The number on
display 9 changes between -7 and +7.