Filter
Top Products
ACD 9430
18
• Now press the ARI button 4. The ARI
indication lights up on display 9 c.
• Then tune in to one of the traffic stati-
ons of your area.
Switch over to CD operation by either
• inserting a disk, or - if a CD is already
inserted by
• pressing the SRC button 6.
CD reproduction will be interrupted as soon
as a traffic message is “put through”.
When leaving the coverage area of the tuned
in traffic station, your car stereo will automa-
tically start searching for a new one.
If no ARI station is found after having scan-
ned the frequency band several times, the
system sends out an alarm tone.
In this case switch off the ARI function by
• pressing button 4. The alarm tone
stops.
Automatic Start of the Station Seek
Operation (CD play)
Your set will also automatically start seeking
for a new traffic station when leaving the
coverage area of the tuned in traffic program-
me while listening to a disk. An alarm tone is
sent out during the search operation.
CD Section
Inserting the Disk
With this set you can play the normal stan-
dard CDs without having to use an adapter:
• Switch the set on.
• Insert the CD (label side up) without
applying force.
The disk is automatically pulled into the unit
to reach the playing position. Once it has
been fed in, reproduction starts.
Ejecting the Disk
• To eject the disk, keep the • SRC
button 6 depressed at least 2 sec.
Never block or support the CD mechanism in
any way, since this would damage the set.
Title Selection/Cueing and Re-
viewing
After the CD has been inserted into the set,
„Cd“ lights up on display 9. The display
indication 9 i changes to “T1” (Track 1) after
approx. 5 seconds. You can skip or repeat
titles by using the </> buttons 7.
Cue (Fast forward):
• Keep depressed the right side of the
rocker switch </> 7 for more than than
2 second.
Review (Fast backward):
• Keep depressed the left side of the
rocker switch </> 7 for more than
than 1 second.
Mix Function
Press the Mix button 5 to listen to the titles
in an arbitrary order.
When Mix is on, the “Mix” indication lights up
on display 9 j.
Changing the Audio Source with
SRC
You can shift between the connected audio
sources in the order CD ♦ Radio ♦ CD. To
switch over to another audio source during
CD operation,
• press the SRC button 6.
The set changes to radio operation.